Ethernet doesn’t have a Valid IP Configuration {Fixes}

Do you often get an error message while using Ethernet? And the message must be like “Ethernet Doesn’t Have A Valid Ip Configuration”. Honestly, it’s not only you but we too have faced the same. …

Ethernet doesn't have a Valid IP Configuration

Do you often get an error message while using Ethernet? And the message must be like “Ethernet Doesn’t Have A Valid Ip Configuration”. Honestly, it’s not only you but we too have faced the same. This is a common situation and it mostly occurs when it is not able to get any valid IP address from your DHCP server. An example of a DHCP server would be a modem, switch, or wireless router.

In general, your network connection will require details such as Default gateway, subnet mask, DNS server, IP address automatically. In case, for any unknown reason if your Ethernet can not obtain any of these, then only it will show you to message mentioned over there. The result would not be that simple and you will not be able to reach any connection on your computer via the DHCP server.

And the annoying result is known by everyone who has faced it and trying to make a way to fix it. However, we would say that you should not worry too much over this because this is typically a software-related issue and it is not at all permanent. You just need to follow a few steps in order to get rid of it and here, I will be sharing the best fixes that will literally woo your mind. With a little ado, we can move further and discuss the best fix.

Fix For Ethernet Doesn’t Have A Valid Ip Configuration

Well, we will definitely share the way of fixing it but before you use any method to make it right, you should once restart your windows PC first and we have seen sometimes, a basic reboot will help you too.

1. Reset Winsock protocol and IP settings:

First of all, you need to reset the IP settings as well as Winsock Protocol as it helps you to get rid of most of the windows related errors and of course, that are related to internet connection also. You need to press Windows+X and then there will be an option “Command Prompt(admin)”. Choose that option from the pop-up menu.

The next that you will have to do is, reset the Winsock protocol on your computer.

Netsh Winsock reset

Following by the other two commands to reset the settings:

Netsh int TCP reset

Netsh int IP rese

Once you are done, you can simply make these changes and reboot your computer. If you are still facing the same issue then you can move further with another solution.

2. Clean-up all the cached files:

If you have already done the step that we have mentioned above then it’s time to try this out. You should clean up all the network cached files that are present on your computer. For performing this, you can follow the steps below.

  • ipconfig/release
  • ipconfig/flushdns
  • ipconfig/renew

Hopefully, after you have done this, your internet connection will be back to normal. If it doesn’t fix the whole thing yet then you might need to try another method.

3. Manually Configure The IP settings:

You might have already set the IP/TCP and of course, it could not help in your case. And you are still wondering the error. Well, worry not! You just need to reset the whole thing again and this time, manually. First of all, you need to right-click on the network connection icon from your taskbar and select the open network and sharing option.

Now, click on the Ethernet network that you are currently using.

Once the first step is done, in the next step you need to click on the Properties button.

And then, you will see the option “Internet Protocol Version 4(TCP/IP)”, you need to double click on it and if you are using IPv6 then you need to click on “Internet Protocol Version 6(TCP/IP)”. While you will be performing this step, you might face two issues and they are

1) Issue 1:

If you have successfully configured static IP address as well as the other necessary details and still you can not connect to the internet. Hence, as a result, your computer will still show Ethernet 2 Doesn’t Have A Valid Ip Configuration, then you might simply do nothing and switch back to automatic configuration method.

You need not do a hell lot of things but follow the steps of the image we are putting below.

2) Issue 2:

In case, you aren’t sure and that’s why you have not set up anything and literally left everything as it was mean default. Now, you need to configure those settings along with the static details. It includes the LAN IP address, default gateway, DNS server, and Subnet Mask.

Once, you have filled all the details you need to click on the OK button and save the changes. After that, you can reboot your computer and check if it has fixed yet or not!

4. Ethernet Doesn’t Have A Valid Ip Configuration Windows 10:

When you are using windows 10 and you are constantly getting the message Ethernet Doesn’t Have A Valid Ip Configuration Reddit or maybe you have tried some ways but they all are still showing Ip Configuration Failure then you need to try a completely different way and see if it works.

1) Reinstall Your Network adapter:

This is the best fix so far so we would be sharing this with you. First of all, you should reboot your computer once and see if the issue is fixed or not. In case, the issue is still not fixed, you can follow these steps.

  • You are required to do, hold the Windows key and press R at the same time.
  • You need to type hdwwiz.cpl in the input field and click on the OK.
  • You need to expand the network adapters and then right-click on the ethernet card and then choose to uninstall the device.
  • There will appear a confirmation dialog, you need to click the uninstall option there as well.
  • Now, reinstall your network adapter using the driver and of course, the hardware.

You will possibly have to do nothing further because it will fix the problem and you do not have to see any further on Windows 10. We know how irritating it is because it will literally not let you connect to anything and you will feel terrible. Sometimes, we have seen that this issue is not fixed that easily.

5. Local Area Connection Doesn’t Have A Valid Ip Configuration:

If you are wondering that fixing the local area connection would be something different than ethernet and you are wrong. Both of the things are the same and you can follow the steps we have mentioned in order to fix the ethernet connection. And you need to do nothing but follow these rigorously so that you can enjoy the internet connection again.


We know how annoying it is to see this error and you can not do anything about it until you follow the steps and fix it. We have discussed the best ways aka fixes so that you can do it hassle-free and enjoy again!

Leave a Comment